Crl Track Assembly D603 Upper and D602 Lower Track With Nylon Wheels D2203

CRL D2203a48 Satin Anodized 48 inch Packaged Track Assembly D603 Upper and D602 Lower Track with Nylon Wheels, Other

These Track Assemblies are smooth operating and will provide years of reliable service. They are easy-to-install. The two pieces of ‘H’ Bar for the bypassing doors have a 1-1/2″ (38 mm) overlap. CRL Cat. No. D332 End Caps for the ‘H’ Bar can be purchased separately. For dry glazing with 1/4″ (6 mm) glass use Cat. No. GC728C Vinyl sold separately). To provide security refer to the large selection of CRL Ratchet and Plunger Type Locks are available. NOTE: Maximum suggested panel size is 36″ W x 48″ H (914 mm x 1.22 m). General Glass Cutting: Guidelines Glass Height = Opening Height Minus 1-1/8″ (28.6 mm). Important Notes: If you need a very tight fit you should figure your own dimensions. The dimensions shown are just guideline dimensions that are satisfactory to most installers. D2203 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-1/8″ D2204 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-1/8″ D2300 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-3/8″ D2301 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-3/8″ D2303 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-3/8″ D2305 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-3/8″ D2306 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-5/8″ D2307 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-5/8″