6/3 Metal Clad Cable with Ground

6/3 Metal Clad (MC) Cable with Ground, Aluminum Armored, Stranded Copper Conductors (25ft Cut)

• MULTIPLE APPLICATIONS: MC Cable used for branch, feeder and service for distribution in commercial, industrial and multi-residential construction
• ALUMINUM JACKET: Aluminum armored for protection
• THHN AMPERE RATING: Rated for 75 Amps
• STANDARDS: Meets UL 83, 1569, 1581 and 2256
• STRANDED COPPER: Conductors are made of soft annealed copper

MULTIPLE APPLICATIONS: MC Cable used for branch, feeder and service for distribution in commercial, industrial and multi-residential construction ALUMINUM JACKET: Aluminum armored for protection THHN AMPERE RATING: Rated for 75 Amps STANDARDS: Meets UL 83, 1569, 1581 and 2256 STRANDED COPPER: Conductors are made of soft annealed copper p APPLICATIONS: /b br Metal Clad Cable may be used for branch, feeder and service for distribution in commercial, industrial, and multi-residential construction. They are suitable for installation in motion picture studios, theaters, and places of assembly (100 people or more) per NEC Articles 230.43, 300.22 , 330, 396, 518, 520, 530 and 645. These cables may be installed in approved raceways and as open runs of cable on a messenger. They may be installed exposed, concealed or in cable tray and may be run in spaces used for environmental air in accordance with NEC Article 300.22 ONLY. – CONSTRUCTION: /b br Solid conductors and the wires for stranded conductors are soft annealed copper to ASTM B3. PVC/Nylon type THHN insulation in accordance to UL 83, flame resistant, meeting UL VW-1. Bare copper ground wire, sized in accordance with NEC and UL, with green THHN insulation. Conductors are cabled with grounding wires. A marker tape/core protection tape combination assembles the core in an essentially round configuration. Interlocking galvanized steel tape armor applied directly over the core. flame test. – STANDARDS: /b br -Meets UL 83: Thermoplastic Insulated Wires and Cables br -Tested to UL 1479: Fire Tests of Through-Penetration Firestops for one, two or three hour fire rated assemblies (for cables up to #2 AWG) br -Meets UL 1569: Metal Clad Cables br -Meets UL 1581: Reference Standard for Electrical Wires, Cables, and Flexible Cords br -Meets UL 2256: Wire and Cable Test Methods br -Designated Type MC per NEC Article 330 – SPECIFICATIONS: /b br Size: 6 AWG br Outside Diameter: 0.840 inches br Ampere Rating THHN: 75 Amps /p