Dieselsite WW65 Dieselsite Wicked Wheel 2 Performance Compressor Wheel

DieselSite Wicked Wheel 2 Performance Compressor Wheel, Chevy/GMC (1992-01) 6.5L Diesel, Stock Turbo

Important tip:It is a left hand thread (reverse thread), meaning you turn the nut to the right to loosen. The Wicked Wheel is balanced at the Factory. Turbo balancing after installation is not necessary.Our goal with this project was to create a more efficient turbocharger. When you increase boost without increasing rpms or drive pressure, the load on the turbocharger is the same for the elevated boost as is was for the original lower boost number. The best part is when you run at lower pressures, like you would in daily driving conditions, the drive pressure/ boost pressure ratios are always lower, which should in turn result in longer turbo life, not less. ~ Bob RileyWhile capable of high boost numbers with supporting mods these wheels are safe for stock turbo applications! DO NOT USE AN IMPACT WRENCH TO CHANGE TURBO WHEELS! Impact wrenches cause stress fractures in the shaft that will cause failure either very soon or thousands of miles down the road. It’s like a crack in your windshield that grows over time. Take your time and remove the turbo, hold onto the turbine shaft and remove the compressor wheel with an open end wrench.