Seal Spray All Season Black Gun Foam 12/23.3 OZ Cans w/15 Gun Foam Applicator and 1 Can of Cleaner

Seal Spray All Season Black Gun Foam – 12/23.3 oz Cans (1 CASE) w/15″ Gun Foam Applicator and 1 Can of Cleaner

• Great for Landscaping and Roofing applications.
• Fast curing at low temperatures down to 23F.
• Effective Air and Moisture Barrier.
• High thermal and acoustic insulation value, Foam yield in joint, 3×5 cm (WGM107), per 750 ml filling rate: 18,5 m.
• Low expansion formula.
• Superior insulation and sealing undercarriages on trailers, RVs, Boats, etc.
• 15″ Seal Spray Applicator Gun, and 1 – 16.9oz Can of Seal Spray Cleaner).

SealSpray All Season Black Gun Foam One-component, ready to use polyurethane gunfoam for various building applications, e.g. sealing of joints and penetrations, installation of window and door frames, thermal and acoustic insulating. Ensures good results all year around. Low curing pressure and moderate post expansion avoid deformation of building elements. Adheres well to most materials like wood, concrete, stone, plaster, metal, PVC and polystyrene. APPLICATION TEMPERATURE: Air temperature during use: 23F to 86F, best results at 68F. Can temperature during application: 41F to 77F, best results at 68F. Foam can has to be warmed with water or air (max. 86F) before starting work in low temperatures. SURFACE PREPARATION: Remove dust, loose particles and grease from the surfaces. Moisten dry substrate to ensure better results. Protect adjacent surfaces with paper, plastic film or other suitable material. APPLICATION: Shake the can vigorously at least 20 times. Hold the foam can in upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed at other persons when turning it. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. Turn the can upside down and start applying. The foam output can be adjusted by the gun trigger. When applying foam in layers moisten slightly between each layer. SPECS: Tack free time (TM 1014): 8-12 min, Cutting time (TM 1005): 80 / 19 kPa / %, Tensile strength / elongation (TM 1018, moistened surfaces): >65 / 19 kPa / %, Compression strength (TM 1011,>20 kPa, Foam yield in joint, 3×5 cm (WGM107), per 750 ml filling rate: 18,5 m