Simpson Strong-Tie HHUS Joist Hanger HHUS5.50/10

Simpson Strong-Tie HHUS Joist Hanger

• Can be installed after the beam is secured in place.
• HHUS-series hangers are tested, load rated and code compliant.
• Galvanized. Some products available in HDG or ZMAX coating. See Corrosion Information.
• Use all specified fasteners; see General Notes.
• Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
• Not designed for welded or nailer applications.
• Do not use double-shear hangers with I-joists.

Simpson Strong-Tie HHUS hangers are designed for applications where higher loads are needed. These hangers utilize double shear nailing for added strength. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. The Strong-Tie HHUS5.50/10 face mount joist hanger features a G90 galvanized finish for corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.